{ "id": "sewer-jetter-kit-50-ft-with-gun", "sku": "sewer-jetter-kit-50-ft-with-gun", "title": "50 Ft Sewer Jetter Kit with Pressure Washer Gun and 3 Nozzles", "slug": "sewer-jetter-kit-50-ft-with-gun", "price": 77.99, "currency": "USD", "availability": "in_stock", "category": "drain-cleaning-brushes", "category_label": "Drain Brushes & Jetter Hoses", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "2.12 kg", "images": [ "https://ezydrains.com/dropship-images/drain-cleaning-brushes/sewer-jetter-kit-50-ft-with-gun/main-sewer-jetter-kit-50-ft-with-gun.jpg", "https://ezydrains.com/dropship-images/drain-cleaning-brushes/sewer-jetter-kit-50-ft-with-gun/sewer-jetter-kit-50-ft-with-gun-3.jpg", "https://ezydrains.com/dropship-images/drain-cleaning-brushes/sewer-jetter-kit-50-ft-with-gun/sewer-jetter-kit-50-ft-with-gun-4.jpg", "https://ezydrains.com/dropship-images/drain-cleaning-brushes/sewer-jetter-kit-50-ft-with-gun/sewer-jetter-kit-50-ft-with-gun-5.jpg", "https://ezydrains.com/dropship-images/drain-cleaning-brushes/sewer-jetter-kit-50-ft-with-gun/sewer-jetter-kit-50-ft-with-gun-6.jpg", "https://ezydrains.com/dropship-images/drain-cleaning-brushes/sewer-jetter-kit-50-ft-with-gun/sewer-jetter-kit-50-ft-with-gun-7.jpg", "https://ezydrains.com/dropship-images/drain-cleaning-brushes/sewer-jetter-kit-50-ft-with-gun/sewer-jetter-kit-50-ft-with-gun-8.jpg", "https://ezydrains.com/dropship-images/drain-cleaning-brushes/sewer-jetter-kit-50-ft-with-gun/sewer-jetter-kit-50-ft-with-gun-9.jpg" ], "description_short": "A 50 foot jet hose rated to 5800 psi, three task-specific nozzles, a trigger gun, two adapters, a quick connect plug, wrenchs, waterproof tape and a pin box for clearing nozzle jets.", "description": "The problem with a slow drain\n\nA drain rarely blocks overnight. It narrows. Grease cools and sticks to the pipe wall, soap scum grabs hair, silt settles in the low spots, and the bore gets smaller month by month. You notice a gurgle, then a slow sink, then one day the water simply sits there.\n\nAt that point most people reach for a chemical. Chemicals can burn a hole through a soft plug, but they do nothing about the hard ring of build-up lining the pipe, and the blockage returns. A drain rod or a hand snake punches a path through, which is better, but again the pipe wall stays coated.\n\nWater jetting is the method that actually cleans the pipe. A nozzle with rear-facing jets travels down the line, scours the walls, and flushes the debris back toward the chamber. That is why plumbers use it, and with a kit like this one you can do the routine version of the same job with the pressure washer in your garage.\n\nHow a jetter actually works\n\nThe idea is simple once you see it. The hose carries high pressure water to a small nozzle. Most of the holes in that nozzle point backwards at an angle. When you squeeze the trigger, water sprays rearward, and the reaction from that spray pushes the nozzle forward. It pulls the hose along behind it and cuts into whatever is in the way.\n\nA forward hole, where one is installed, does the drilling. The backward jets do two jobs at once. They provide the thrust, and they blast the pipe wall clean as the head travels. On the way back out, the same jets push all that loosened material toward the access point so it leaves the system.\n\nThis kit covers both halves of that job with its three heads. The button nose concentrates the water for breaking through a plug. The rotating nozzle spins so the spray sweeps the full circle of the pipe, which is the most effective choice for grease. The corner nozzle is shaped to negotiate a tight change of direction where a straight head keeps nosing into the pipe wall and stalling.\n\nWhat you need to run it\n\nYou supply the pressure washer. The kit supplies everything between the washer and the blockage: the gun, the 50 foot hose, the heads and the fittings.\n\nConnection is the first thing to check. Two adapters are included, M22 to 15 mm male and M22 to 14 mm male, along with a quarter inch quick connect plug. Those three fittings cover the great majority of domestic machines. Look at your washer outlet or the base of your lance, note the thread, and match it up before the water goes on.\n\nPressure is the second thing. The hose carries a maximum rating of 5800 psi, which is well above what a household washer produces. That headroom is good news, because it means the hose is not the weak link in the chain. In practice, flow rate matters just as much as pressure for jetting. A machine with a healthy liters-per-minute figure will carry debris out of the pipe better than a high pressure, low flow unit.\n\nWho it suits\n\nThis is a tool for homeowners, landlords, caretakers and small site maintenance people. If you own the property and deal with the same stubborn kitchen line or the same silted yard yard drain every year, owning a drain cleaning hose for a pressure washer pays for itself quickly.\n\nIt also suits anyone with a long outdoor run. Driveway drains, garage floor traps, stable yards and allotment lines all fill with grit and leaf litter, and they are easy jetting jobs because access is usually open and the pipe is straight.\n\nWhere it is not the answer is structural failure. If a pipe has collapsed, been crushed by a vehicle, or is packed solid with mature roots, no amount of water will put that right. The tell is a blockage that returns within weeks at exactly the same spot. That calls for a camera survey, not another pass with the hose.\n\nChoosing the right length\n\nFifty feet is a sweet spot for domestic work. Shorter hoses run out before you reach the interesting part of the line. Much longer hoses lose pressure to friction, get heavy to handle, and are awkward to coil and store.\n\nThink about where your access points are. Most houses have a clean-out or an inspection chamber, and the distance from there to the next chamber is usually well inside 50 feet. If you can work from both ends of a run, you effectively double your reach. That is the normal way to clean a long line anyway, because you always want the debris to have somewhere to go.\n\nWorking safely and getting good results\n\nPut the eye protection on first. Drain water is dirty, it comes back out under pressure, and a nozzle running in open air is genuinely dangerous. Gloves and boots are sensible too.\n\nFeed several feet of hose into the pipe before you touch the trigger. If the nozzle is near the opening when the water hits full pressure, it can whip back out. A lot of people wrap a piece of tape around the hose a couple of feet behind the nozzle as a visual reminder of where the danger zone starts. Release the trigger before you pull the head back past that mark.\n\nWork in stages. Feed in a few feet, let the head cut, feed in a few more. If it stops moving, draw back a meter and push again with a gentle pumping rhythm. That little back-and-forth is usually enough to get a head past a bend. If it refuses at the same point every time, change to the corner nozzle.\n\nWhen the line is running, do not pack up. Feed the rotating head all the way back down and draw it out slowly. That return pass is where most of the real cleaning happens, and it is the difference between a drain that stays clear for a year and one that blocks again in a month.\n\nLooking after the kit\n\nGrit is the enemy of a jetting nozzle. The orifices are small, and a single piece of sand will spoil the spray pattern. After every job, shut the machine down, release pressure, and run clean water through the hose and head. Check each jet with the supplied pin and poke out anything lodged inside.\n\nLet the hose dry before you coil it. Coil it loosely rather than in tight loops, hang it if you can, and keep it out of permanent sunlight. Store the nozzles and adapters together in a bag or box so you are not hunting for the right fitting the next time the sink backs up.\n\nKeep an eye on the joints. Threaded fittings in a wet, gritty environment eventually weep. The waterproof tape included in the kit is there for exactly that, so re-wrap a thread the moment you see a drip rather than waiting.\n\nThe short version\n\nIf you already own a pressure washer, this kit converts it into a tool that clears and cleans drains instead of just rinsing patios. You get 50 feet of hose rated to 5800 psi, a trigger gun, three nozzles for three different situations, two M22 adapters, a quick connect plug, wrenchs, tape and a pin box for the jets.\n\nUse the button nose to open a blockage, the rotating head to scour the pipe clean, and the corner head when a bend fights you. Flush and dry everything afterwards, run the lines once or twice a year as maintenance, and most household drain problems stop happening at all. For the ones that do not stop, you will at least know quickly that the pipe itself needs attention.", "llm_summary": "The Sewer Jetter Kit is a 50 foot drain jetting set that connects to a pressure washer. The jet hose is rated to a maximum 5800 psi and has a 1.5 inch outside diameter. The kit includes a pressure washer gun, three nozzles (button nose, rotating and corner), two adapters (M22 to 15 mm male and M22 to 14 mm male), a quarter inch quick connect plug, two wrenchs, waterproof tape and a pin box for clearing nozzle jets. Listed item weight is 2.12 kg and listed product dimensions are 28 inches long by 2 inches wide. Color is described as Red with Gun. Material, country of origin and warranty are not specified by the maker.", "returnable": true, "return_policy": "There is no federal cooling-off period on an ordinary online purchase in the United States, so the change of mind window below is this shop's own policy rather than a legal right: 15 days from purchase on an unused item in its original packaging, with proof of purchase, where the customer pays return shipping and a non-refundable 29 dollar per order handling charge applies. An order can be cancelled free of charge until it ships; after payment and before shipping a 12.5 percent processing fee applies. Separately, and whatever this policy says, the FTC Mail, Internet, or Telephone Order Merchandise Rule requires us to ship within the time we state or within 30 days if we state none, and to offer a cancellation with a prompt refund if we cannot. Goods that arrive faulty, damaged, incomplete or not as described are put right at our cost, and nothing here limits the implied warranty of merchantability or any right your state's consumer protection law gives you.", "shipping_profile": "standard", "warranty": null, "brand": "EzyDrains Company America", "gtin": null, "mpn": null, "condition": "new", "url": "https://ezydrains.com/product/sewer-jetter-kit-50-ft-with-gun/", "canonical_url": "https://ezydrains.com/product/sewer-jetter-kit-50-ft-with-gun/", "json_url": "https://ezydrains.com/api/products/sewer-jetter-kit-50-ft-with-gun.json", "updated_at": "2026-10-11" }