{ "id": "silicone-tub-stopper-2-pack", "sku": "silicone-tub-stopper-2-pack", "title": "Silicone Tub Stopper 2 Pack", "slug": "silicone-tub-stopper-2-pack", "price": 11.99, "currency": "USD", "availability": "in_stock", "category": "sink-and-tub-stoppers", "category_label": "Sink & Tub Stoppers", "tags": [], "colors": [], "materials": [], "dimensions": null, "weight": "0.12 kg", "images": [ "https://ezydrains.com/dropship-images/sink-and-tub-stoppers/silicone-tub-stopper-2-pack/main-silicone-tub-stopper-2-pack.jpg", "https://ezydrains.com/dropship-images/sink-and-tub-stoppers/silicone-tub-stopper-2-pack/silicone-tub-stopper-2-pack-2.jpg", "https://ezydrains.com/dropship-images/sink-and-tub-stoppers/silicone-tub-stopper-2-pack/silicone-tub-stopper-2-pack-3.jpg", "https://ezydrains.com/dropship-images/sink-and-tub-stoppers/silicone-tub-stopper-2-pack/silicone-tub-stopper-2-pack-4.jpg", "https://ezydrains.com/dropship-images/sink-and-tub-stoppers/silicone-tub-stopper-2-pack/silicone-tub-stopper-2-pack-5.jpg", "https://ezydrains.com/dropship-images/sink-and-tub-stoppers/silicone-tub-stopper-2-pack/silicone-tub-stopper-2-pack-6.jpg" ], "description_short": "Two soft silicone plugs with stepped sealing rings fit most bathroom tub and sink drains between 1 and 2 inches, so you can swap one in without tools, hardware or a plumber.", "description": "The slow leak nobody warns you about\n\nA tub that drains while you are still in it is a special kind of annoying. You get the temperature right, you settle in, and then you notice the waterline creeping down your back. Within half an hour you are lying in a puddle, reaching for the hot faucet again.\n\nMost people blame the plumbing. The plumbing is usually fine. What has failed is the seal between the plug and the drain, and that is a cheap thing to fix.\n\nOlder rubber plugs harden and shrink. Chains snap. Pop-up fittings, the ones you push with your toe, go out of alignment or collect hair around the mechanism until they no longer close flush. In rentals and vacation homes, the plug has often simply vanished and nobody replaced it. None of those problems need a tradesperson. They need a plug that fits.\n\nHow a stepped silicone plug works\n\nA traditional plug is a flat rubber disc with a lip. It sits on top of the drain rim and the weight of the water holds it there. That works right up until the rim is uneven, scratched or furred with limescale, at which point water finds a path around the edge.\n\nA stepped silicone plug works differently. Instead of sitting on the rim, it goes down into the opening. The body is molded with tiered rings that get slightly wider as they go up, so the plug makes contact with the inside wall of the drain at more than one height. Push it in and the rings compress against the pipe. Fill the tub and the pressure from above presses the plug further down, which tightens the seal rather than lifting it.\n\nThe silicone matters here too. It is soft enough to deform into a drain that is slightly out of round or a bit scratched, and elastic enough to spring back when you pull it out. Hard plastic cannot do that. Old rubber could, once, but it loses the ability as it ages.\n\nThe practical upshot is a plug that copes with imperfect drains. You do not need a pristine, factory-fresh opening for it to work.\n\nWho this suits\n\nRenters get the most obvious benefit. You cannot replace a pop-up drain in someone else's bathroom, and most landlords are not going to send a plumber because the tub drains a bit. A plug you push in and take with you when you move is a sensible answer.\n\nPeople in older houses are the next group. Drains that have been in place for thirty years rarely have a smooth rim left. A flat plug struggles. A plug that seals against the inside of the pipe does not care so much about the state of the rim.\n\nThen there are the people who just want a longer soak. If your tub holds water for twenty minutes and you want an hour, the best bathtub drain plug is the one that lets you stop topping up the hot faucet.\n\nFamilies with a laundry tub, a utility sink or a second sink also do well out of a two pack. One stays in the bathroom, the other goes wherever it is needed.\n\nGetting the size right\n\nThis is the part that decides whether you are happy or irritated, so it is worth two minutes with a tape measure.\n\nMeasure across the open drain hole itself, not the metal flange or the decorative ring around it. The number you want is the internal diameter of the opening. If it sits between 1 in and 1-1/2 in, the smaller plug in the pack is yours. Between 1-1/2 in and 2 in, use the larger one.\n\nThen check the depth. The maker suggests at least 0.88 in of clear depth so the sealing rings have somewhere to grip. If your drain has cross bars sitting right at the surface, the plug will perch on them instead of seating properly, and it will leak. Drop a pencil in and see how far it goes before it stops.\n\nA quick tip. If you are between sizes, try the larger plug first. A plug that is slightly oversized compresses and seals. A plug that is slightly undersized rattles and floats.\n\nPutting it in and taking it out\n\nPush the plug into a dry or barely damp drain. Press down with your thumb and give it a small twist so the rings settle against the wall. You should feel it grip. Then run the water.\n\nTo remove it, hook a fingertip under the edge and lift. The silicone bends, air gets underneath, and the seal releases. There is no suction cup to go brittle and no chain to rust through.\n\nIf it leaks the first time, do not assume it is the wrong size. Pull it out and look at the rings. Hair, a bit of grit or a film of soap is almost always the culprit. Wipe the plug and run a finger around the inside of the drain to clear anything stuck there, then try again.\n\nLooking after it\n\nSilicone is easy. Rinse it under warm water when you pull the tub, then wipe it dry and leave it somewhere it can air out. That alone handles most of it.\n\nEvery few weeks, give it a proper wash with dish soap and a soft cloth, paying attention to the grooves between the rings. That is where soap scum likes to build up, and a clean ring is a ring that seals.\n\nKeep bleach, drain cleaner and abrasive powders away from it. Scratches in the sealing surface are what eventually ruin a plug, and scouring pads are very good at making scratches. Store it flat or hanging rather than squashed under something heavy, and the shape stays true.\n\nA couple of things it will not do\n\nWorth being straight about. A push-in plug cannot work where there is no clear opening. If your tub has a pop-up fitting bolted in place, you need to remove that fitting first, and some of them are stubborn.\n\nIt also will not fix a drain that is leaking below the plug, at the drain connection or in the trap. If water is disappearing even with the plug sitting tight and the surfaces clean, the problem is further down the pipe and worth a proper look.\n\nAnd it is not a hair catcher. It blocks the drain completely by design. If you want something that lets water through while trapping hair, that is a different product.\n\nThe short version\n\nA tub that will not hold water is nearly always a plug problem, not a plumbing problem. Stepped silicone plugs seal against the inside of the drain rather than balancing on the rim, which makes them far more forgiving on older or scratched openings.\n\nMeasure your drain opening across the widest point and check it has at least 0.88 in of depth. Anything from 1 in to 2 in across is covered by one of the two plugs in this pack. Push it in, give it a twist, and get your tub back.\n\nIt costs less than a bottle of bath oil and takes about five seconds to fit. For a problem that has been quietly annoying you for months, that is a decent trade.", "llm_summary": "The Silicone Tub Stopper 2 Pack by (model 6211-4) is a pair of soft silicone drain plugs for bathtubs, bathroom sinks, laundry tubs and shower drains. The plugs use stepped sealing rings to grip the inside of the drain and hold water. The pack contains two sizes, a smaller plug suited to drain openings of about 1 in to 1-1/2 in and a larger plug for about 1-1/2 in to 2 in, with a suggested drain depth of at least 0.88 in. The listed color is black, material is silicone, and item weight is 0.12 kg. No installation, tools or hardware are required. Country of origin and overall product dimensions are not specified by the maker.", "returnable": true, "return_policy": "There is no federal cooling-off period on an ordinary online purchase in the United States, so the change of mind window below is this shop's own policy rather than a legal right: 15 days from purchase on an unused item in its original packaging, with proof of purchase, where the customer pays return shipping and a non-refundable 29 dollar per order handling charge applies. An order can be cancelled free of charge until it ships; after payment and before shipping a 12.5 percent processing fee applies. Separately, and whatever this policy says, the FTC Mail, Internet, or Telephone Order Merchandise Rule requires us to ship within the time we state or within 30 days if we state none, and to offer a cancellation with a prompt refund if we cannot. Goods that arrive faulty, damaged, incomplete or not as described are put right at our cost, and nothing here limits the implied warranty of merchantability or any right your state's consumer protection law gives you.", "shipping_profile": "standard", "warranty": null, "brand": "EzyDrains Company America", "gtin": null, "mpn": null, "condition": "new", "url": "https://ezydrains.com/product/silicone-tub-stopper-2-pack/", "canonical_url": "https://ezydrains.com/product/silicone-tub-stopper-2-pack/", "json_url": "https://ezydrains.com/api/products/silicone-tub-stopper-2-pack.json", "updated_at": "2026-10-11" }