{
  "id": "washer-drain-hose-extension-6-5-ft",
  "sku": "washer-drain-hose-extension-6-5-ft",
  "title": "6.5 Ft Washer Drain Hose Extension Kit with Clamps and U-Bend",
  "slug": "washer-drain-hose-extension-6-5-ft",
  "price": 18.99,
  "currency": "USD",
  "availability": "in_stock",
  "category": "appliance-drain-hoses",
  "category_label": "Washer & Dishwasher Drain Hoses",
  "tags": [],
  "colors": [],
  "materials": [],
  "dimensions": null,
  "weight": "0.17 kg",
  "images": [
    "https://ezydrains.com/dropship-images/appliance-drain-hoses/washer-drain-hose-extension-6-5-ft/main-washer-drain-hose-extension-6-5-ft.jpg",
    "https://ezydrains.com/dropship-images/appliance-drain-hoses/washer-drain-hose-extension-6-5-ft/washer-drain-hose-extension-6-5-ft-2.jpg",
    "https://ezydrains.com/dropship-images/appliance-drain-hoses/washer-drain-hose-extension-6-5-ft/washer-drain-hose-extension-6-5-ft-3.jpg",
    "https://ezydrains.com/dropship-images/appliance-drain-hoses/washer-drain-hose-extension-6-5-ft/washer-drain-hose-extension-6-5-ft-4.jpg",
    "https://ezydrains.com/dropship-images/appliance-drain-hoses/washer-drain-hose-extension-6-5-ft/washer-drain-hose-extension-6-5-ft-5.jpg"
  ],
  "description_short": "A 6.5 ft corrugated hose with four step-down fittings, an adapter, three clamps and a U-bend holder, so one kit handles washers, portable units and dishwashers.",
  "description": "The problem with the hose your machine came with\n\nAppliance makers include a drain hose, and it is almost always the shortest length they can get away with. That makes sense in a showroom, where the machine sits against a wall with a standpipe directly behind it. It makes a lot less sense in a real laundry, where the drain might be two meters away, behind a cabinet, or where the only option is to hook the hose over the edge of a laundry tub that is nowhere near the machine.\n\nSo people improvise. They angle the machine out from the wall at a diagonal so the hose can just reach. They prop the end on a bucket. They loop the hose over a faucet and hope the force of the pump does not throw it off mid-cycle. Every one of those fixes works right up until it does not, and then you are mopping.\n\nA drain hose extension is the small, boring fix. You add a length of flexible hose between the machine and the drain, clamp the joins, and the water goes where it is supposed to go. The 6.5 ft kit here comes with the parts that make that job actually finishable in one go: the hose, four fitting sizes, three clamps and a U-bend holder.\n\nHow a washer drain hose actually works\n\nYour machine does not rely on gravity to empty. A pump pushes the water out through the drain hose. That matters for two reasons.\n\nFirst, the hose has to stay open along its whole length. If it pinches shut behind the machine, the pump strains and the cycle takes longer or stops with an error. This is why the hose is corrugated. Those ribs let the tube bend around a corner while the internal passage stays round. A smooth-wall tube of similar thickness would flatten at the first tight turn.\n\nSecond, the end of the hose has to stay put. A pump pushing water through a loose hose end will move that hose. That is what the U-bend holder solves. It is a curved bracket that clips over the hose and gives it a stable hook shape, so it sits over the rim of a tub or inside a standpipe and does not jump out when the drain cycle starts.\n\nThere is also a height factor. Every machine has a maximum drain height its pump can manage, and the manual will tell you what it is. An extension changes the distance, not the pump. If you are running the hose up and over something tall, check that number before you buy.\n\nWho this kit suits\n\nThe obvious case is a laundry where the drain is further from the machine than the standard hose reaches. That covers a lot of older homes, converted garages and awkward apartment layouts.\n\nIt is also a good match for portable and compact machines. A portable washer drain hose usually ends at a kitchen or laundry sink, and the stock hose rarely stretches far enough to sit comfortably. The U-bend holder makes hooking over a sink edge straightforward rather than a balancing act.\n\nDishwashers come up often too. Plenty of them use a drain outlet in the same size range, which is why a dishwasher drain hose with clamp is a common search. The deciding factor is always the outlet diameter, not the appliance type.\n\nVan and RV owners use short extensions like this for compact washers as well. The kit is light at 0.17 kg and packs down small, which helps when storage space is tight.\n\nWho it does not suit: anyone whose appliance outlet falls outside the 3/4 to 1-1/2 inch range, and anyone needing a pressurized inlet hose. This is a drain line only.\n\nHow to choose the right extension\n\nMeasure the outlet first. This is the step people skip and regret. Put a tape measure or calipers across the drain spigot on the back of your appliance. Compare it to the four supplied heads, 3/4, 7/8, 1-1/4 and 1-1/2 inches. One of them should be a match. If none is close, a different kit is the answer.\n\nWork out the length you actually need. Run a piece of string from the machine outlet to the drain point, following the path the hose would take rather than a straight line. Add a little slack so the hose is not under tension when the machine vibrates. Then compare that to the 6.5 feet on offer.\n\nCheck what is included. A hose on its own is half a solution. Clamps and a bracket are what make the connection hold, and buying them separately usually costs more than the difference between kits. This one includes three clamps plus the U-bend holder.\n\nLook at the wall type. Corrugated is the right choice for runs with bends. A smooth hose is only better on a dead straight run, which most laundries do not have.\n\nThink about where the hose will sit. If it has to cross a walkway or pass under a machine foot, plan a different route. Crushing is the main way a good drain hose gets wrecked.\n\nFitting it without drama\n\nPull the machine out far enough to work behind it and unplug it. Have a towel and a shallow tray ready, because there will be water left in the old hose.\n\nTake the existing hose off the outlet, or leave it in place and connect to its end if that is how your setup works. Slide the matching fitting onto the outlet, push the corrugated hose over the overlap by a good couple of centimeters, then slip a clamp over that overlap and tighten it with a screwdriver. Firm is enough. Over-tightening can bite into plastic.\n\nRun the hose to the drain along a route with gentle curves. Fit the U-bend holder on the far end and hook it over the tub rim or seat it in the standpipe. The end should sit above the water line in a tub so dirty water cannot siphon back into the machine.\n\nPlug in, run a short rinse and spin, and watch every join while it drains. If you see a weep, tighten that clamp a quarter turn more. Only then push the machine back, and leave a hand's width of clearance so you are not crushing the hose against the wall.\n\nKeeping it working\n\nDrain hoses fail in predictable ways. Lint builds up and narrows the passage. A clamp works loose over months of vibration. A fold hardens into a crack.\n\nFlush the hose with clean water every few months, more often if you wash towels, bedding or pet blankets. Running the end into a tub and starting a rinse cycle does the job. Check the clamps at the same time and give them a quarter turn if they feel slack.\n\nStore a spare hose loosely coiled, not folded flat. Corrugated plastic tolerates bending but not sharp permanent creases. Keep it away from heaters and direct sun, both of which make plastic brittle over time.\n\nIf you ever notice water pooling under the machine, check the joins before blaming the machine. A loose clamp is far more common than a pump failure, and it is a two-minute fix.\n\nThe short version\n\nIf your drain is further away than your hose reaches, you need an extension, and the kits worth buying are the ones that include the clamps and the bracket rather than just a length of tube. This one gives you 6.5 feet of corrugated ABS hose, four fitting sizes covering 3/4 through 1-1/2 inches, three clamps and a U-bend holder, all at 0.17 kg.\n\nMeasure your outlet before you order. That single step decides whether this kit is right or wrong for you, and it takes thirty seconds. Everything after that is a screwdriver and ten minutes.",
  "llm_summary": "This is a washer drain hose extension kit, 6.5 feet long, in gray ABS plastic, weighing 0.17 kg. The hose is corrugated with a 1.5 inch outside diameter and measures 78.74 inches long by 0.94 inches wide as listed. The kit includes the 6.5 ft hose, one white adapter, three hose clamps and a U-bend holder. Four pipe head diameters are supported, 3/4, 7/8, 1-1/4 and 1-1/2 inches, so it suits a range of washing machine, portable washer and dishwasher outlets. It is sold as a single pack, UPC 607601331467. Country of origin and warranty are not specified by the maker. Buyers should measure their appliance drain outlet before ordering.",
  "returnable": true,
  "return_policy": "There is no federal cooling-off period on an ordinary online purchase in the United States, so the change of mind window below is this shop's own policy rather than a legal right: 15 days from purchase on an unused item in its original packaging, with proof of purchase, where the customer pays return shipping and a non-refundable 29 dollar per order handling charge applies. An order can be cancelled free of charge until it ships; after payment and before shipping a 12.5 percent processing fee applies. Separately, and whatever this policy says, the FTC Mail, Internet, or Telephone Order Merchandise Rule requires us to ship within the time we state or within 30 days if we state none, and to offer a cancellation with a prompt refund if we cannot. Goods that arrive faulty, damaged, incomplete or not as described are put right at our cost, and nothing here limits the implied warranty of merchantability or any right your state's consumer protection law gives you.",
  "shipping_profile": "standard",
  "warranty": null,
  "brand": "EzyDrains Company America",
  "gtin": null,
  "mpn": null,
  "condition": "new",
  "url": "https://ezydrains.com/product/washer-drain-hose-extension-6-5-ft/",
  "canonical_url": "https://ezydrains.com/product/washer-drain-hose-extension-6-5-ft/",
  "json_url": "https://ezydrains.com/api/products/washer-drain-hose-extension-6-5-ft.json",
  "updated_at": "2026-10-11"
}